30 Watts Thermoelectric Power Generator for biosmass or wood stove

A thermoelectric power generator for Gas Stove or Wood Stove or any other heat sources.

    The generator can be placed on the top surface or mounted onto the side wall of stove to generate the electricity for charging the battery and powering electronics with its 12 VDC and 5 VDC outputs. The generator comes with a self-powered fan to dissipate the heat. When the hot plate of the generator is heated to 380°C, the output power at matched load is over 30watts, and at 12 VDC will go over 24.5 watts. The Generator is good for running on up to 450 °C heat source surface. It is not only a power generator, but also help circulates the heat with its attached fan. The unit is, light in weight, small in size, easy to carry or install to any hot surface.

For more application, you can search our web  http://www.thermonamic.com. 

The Output Performance:  

Instructions in use

(1) Put the generator on the heat source surface or mount it onto the wall of heat resource. About 30 seconds later, the cooling fan of the generator starts running. Wait for 5 minutes till the cooling fan running at full speed. Then you can add the load on the generator.

(2)  How to install and uninstall output wires:

    

Notes

(1) The casing will become a bit hot after a while. Do not touch the generator casing.

(2) 30 seconds after the generator is placed on the heat source surface, please check if the fans start to rotate. If you do not see the fan starts to blow the air. Please take out the generator to check. To remove, please use the hanger on the top of the generator.

(3) Generator can operates at temperature up to 450°C heat source surface.

 

Packing List(1) 30W generator one set(2) Cigarette lighter (with USB port) one set(3) Battery Charging clip one pair